Earthing Tester

Product Details:

• 3pole and 2pole Earth Resistance measurement (0.01Ω-2000Ω)• Waterproof design (IP67)• Rotary Switch makes the user interface very intuitive• Large LCD Display with Backlight• Led to monitor correct / non correct auxiliary earth spike resistance• Earth Voltage Measurement (AC/DC 0-300V)• CAT   100V Inc. Accessories: 7127B(Simplified measurement probe), 8041(Auxiliary earth spikes[2 spikes/1set]), 9121(shoulder strap), 7267(Cable reel for Earth resistance tester (red)),7268(Cable reel for Earth resistance tester (yellow)), 7271(Earth resistance test leads), 9190(Carrying case), LR6(AA) × 6, Instruction manual

Additional Information:

• Item Code: 4105Dl
• Production Capacity: More than 100
• Delivery Time: 4-6 Weeks

Product Details:

• The earth resistance from 0.05 to 1500Ω can be measured without the auxiliary earth spikes.(The Multiple Earthing System.)• True RMSAccurate true RMS readings of AC current including distorted waveform from 1mA to 30.0A• Noise Check FunctionA function to detect current, which effects on an earth resistance measurement and display "NOISE" mark on the LCD.• Memory functionSave and display up to 100 measurement data.• Data hold function / Buzzer function / Back light function• Compliant with Safety Standards of IEC 61010-1 : CAT IV 300V Pollution degree2
Note:A single earthing can not be measured. (Only for Multiple Earthing System) Inc. Accessories: R6 x 4, Instruction manual, 8304 (Resister for operation check), 9166 (Carrying case[Hard])

Product Details:

• High test current up to 80mA yielding resolution of 0.001Ω on 2Ω range.
• Advanced Filtering method (based on FFT Fast Fourier Transform) reduces noise interference for obtaining stable measurements.
• Automatic and Manual selection of the Test Current Frequency in four bands (94/105/111/128Hz). In Automatic mode, KEW 4106 will select the most suitable Frequency.
• Several sub-results can be shown on the display: Resistance of the Auxiliary Earth Spikes, Frequency of Test Current, Voltage and Frequency of Interference (noise), Residual Resistance Rk, etc.
• Warning for excessive noise and high Auxiliary Earth Spikes resistance.• Large Graphic Display with backlight for readings in poorly illuminated areas.
• Up to 800 measurement results can be saved in the memory and recalled on the display.
• The stored results can be transferred to a PC using the "KEW Report" software and a USB adaptor (Model 8212-USB) which are included.
• Robust design with IP54 protection. Inc. Accessories: 7229A (Earth precision measurement), 7238A (Simplified measurement test leads), 8032 (Auxiliary earth spikes [2 spiks/set])×2 sets (4 spikes in total), 8200-04 (Cord reel [4 pcs])×1 set, 8212-USB (USB adaptor with "KEW Report(Software)"), 9121 (Shoulder strap),9125 (Carrying case), R6 × 8, Instruction manual, Test certificate

Product Details:

• Dust and drip proof.(designed to IEC 529 IP54)• In addition to the facility for precision measurement, test leads for simplified two wire easuring system also supplied as standard accessories.(unit can be hung from the neck for simplified measurement)• Designed to meet IEC 61010-1 safety standard.• Capable of measuring earth voltage.• Automatic warning when resistance of auxiliary earth spikes is in excess of tolerance.• Small and lightweight. Shock resistant new case material.• 2mA measuring current permits earth resistance tests without tripping earth leakage current breakers in the circuit under test.Inc. Accessories: 7095A (Earth resistance test leads) × 1set (red-20m, yellow-10m, green-5m), 8032 (Auxiliary earth spikes) × 1set, 7127A (Simplified measurement probe) × 1set, R6 (AA) × 6, Neck strap, Instruction ManualCarrying case : 9165(Carrying case[Hard]:4105A-H only)

Product Details:

• Dust and drip proof.(designed to IEC 529 IP54)• In addition to the facility for precision measurement, test leads for simplified two wire easuring system also supplied as standard accessories.(unit can be hung from the neck for simplified measurement)• Designed to meet IEC 61010-1 safety standard.• Capable of measuring earth voltage.• Automatic warning when resistance of auxiliary earth spikes is in excess of tolerance.• Small and lightweight. Shock resistant new case material.• 2mA measuring current permits earth resistance tests without tripping earth leakage current breakers in the circuit under test.Inc. Accessories: 7095A (Earth resistance test leads) × 1set (red-20m, yellow-10m, green-5m), 8032 (Auxiliary earth spikes) × 1set, 7127A (Simplified measurement probe) × 1set, R6 (AA) × 6, Neck strap, Instruction ManualCarrying case : 9165(Carrying case[Hard]:4105A-H only)

Additional Information:

• Delivery Time: 4-6 Weeks

Product Details:

• The earth resistance from 0.05 to 1500 Ω can be measured without the auxiliary earth spikes in multi-earthing systems• True RMS leakage or phase current readings from 0.1mA to 30.0A provides vital additional information in earthing networks• Filter function offers increased immunity to electrical noise and a Noise mark appears in excessively high noisy environments Inc. Accessories:  LR6 x 4, Instruction manual, 8304 (Resister for operation check). 9167 (Carrying case[Hard])

Product Details:

KEW 4300 is simplified earth resistance tester (based on 2-pole method) that can be used for various distribution lines and electrical appliances and it also can measure AC/DC voltage. (As for AC Voltages, true rms values can be obtained.)• 200/2000Ω (2 ranges): auto-ranging.• Warning buzzer triggered at 100Ω or less.• LED lights up when a large earth voltage is detected.• Live circuit warning when 30V or higher voltage is detected. (KEW 4300 detects voltage even when measuring resistances.)• LED light for illuminating measurement points.(It turns on/off automatically in relation to the ambient brightness.)• Small test current (max 2mA) not triggering RCD. Inc. Accessories: 7248 (Test lead with Alligator clip and Flat test probe), 8072 (CAT II Standard prod), 8253 (CAT III Standard prod), 8017 (Extension prod long)9161 (Carrying case), Instruction manual, LR6 (AA) × 2

Additional Information:

• Delivery Time: 4-6 weeks
• Packaging Details: 7248 (Test lead with Alligator clip and Flat test probe) 8072 (CAT II Standard prod) 8253 (CAT III Standard prod) 8017 (Extension prod long) 9161 (Carrying case) Instruction manual, LR6 (AA) ¿¿ 2

Product Details:

• AC and DC voltage tests up to 690V with LED• Comply with the latest standards IEC 61243 and IEC 61010• Novel design     Large and bright LEDs: Values are visible in the dark place     Ergonomic design fits in the hand• Two functions are available in one model     "Measurement without battery" and "Self Test (all LED on)"• Test leads withstand harsh environments at low temperature• Penlight (white LED)• Auto-power ON/OFF• Audible indication• Variable test tips, φ2mm or φ4mm• Probe protection cover can store the attachment of caps• IP65 (IEC 60529)
Inc. Accessories: LR03 (AAA) 1.5V×2, KTA01 (4mm metal tips [2pcs/set]), KTA02 (4mm rubber caps [2pcs/set]), Instruction manual

Product Details:

• 3pole and 2pole Earth Resistance measurement (0.01Ω-2000Ω)• Waterproof design (IP67)• Rotary Switch makes the user interface very intuitive• Large LCD Display with Backlight• Led to monitor correct / non correct auxiliary earth spike resistance• Earth Voltage Measurement (AC/DC 0-300V)• CAT Ⅳ 100V Inc. Accessories: 7127B(Simplified measurement probe), 8041(Auxiliary earth spikes[2 spikes/1set]), 9121(shoulder strap), 7266(Earth resistance test leads[red-20m, yellow-10m, green-5m/1set]), 9191(Hard case), LR6(AA) × 6, Instruction manual

Product Details:

• Correct measuring for Insulation resistance even if the panel is under generating power• Waterproof design: Can measure under the bad weather condition• Memory function up to 1000 data• Luminescence button and Backlight Inc. Accessories: 7196A(Test leads with remote control switch), 7244A(Test lead with alligater clip), 8017(Extension prod), 8072(CAT II standard prod), 8212-USB(USB adaptor with "KEW Report (Software)"), 9155(Shoulder strap), 9156(Carrying case), LR6x6, Instruction manual

Additional Information:

• Item Code: 6024PV
• Delivery Time: 3 days

Product Details:

• The latest circuit design permits the instrument to operate with the minimum of influence from earth voltage and earth resistance of auxiliary earth spikes.
• Dust and drip proof. (designed to IEC 529 IP54)• Earth resistance value can be read directly from the scale.
• Designed to meet IEC 61010-1 safety standard.• Capable of measuring earth voltage.• Small and lightweight. Shock resistant new case material.
• 2mA measuring current permits earth resistance tests without tripping earth leakage current breakers in the circuit under test.
• Lead wire connection to C and P terminals and proper auxiliary earth resistance can be checked by "OK" lamp. Lead wire connection to C and E terminals is good when "OK" lamp is illuminated. Inc. Accessories: 7095A (Earth resistance test leads) × 1set (red-20m, yellow-10m, green-5m), 8032 (Auxiliary earth spikes) × 1set, 7127A (Simplified measurement probe) × 1set, R6 (AA) × 6, Neck strap, Instruction ManualCarrying case : 9084(Carrying case[Soft]:4102A only)

Product Details:

KEW 4300 is simplified earth resistance tester (based on 2-pole method) that can be used for various distribution lines and electrical appliances and it also can measure AC/DC voltage. (As for AC Voltages, true rms values can be obtained.)• 200/2000Ω (2 ranges): auto-ranging.• Warning buzzer triggered at 100Ω or less.• LED lights up when a large earth voltage is detected.• Live circuit warning when 30V or higher voltage is detected. (KEW 4300 detects voltage even when measuring resistances.)• LED light for illuminating measurement points.(It turns on/off automatically in relation to the ambient brightness.)• Small test current (max 2mA) not triggering RCD. Inc. Accessories: 7248 (Test lead with Alligator clip and Flat test probe), 8072 (CAT II Standard prod), 8253 (CAT III Standard prod), 8017 (Extension prod long)9161 (Carrying case), Instruction manual, LR6 (AA) × 2